Yantai Bonway Manufacturer

Pribor

Klizne šine za veličine motora 280 - 400

Klizne šine za veličine motora 280 - 315

Klizne šine za veličine motora 355 - 400

Note: Slide rails that do not fulfill the DIN standard are available for motor size 450 on request.

A set of slide rails includes two complete rails with screws for mounting the motor on the rails. Screws for mounting the rails on the foundation are not included. Slide rails have unmachined lower surfaces and should be supported in a suitable manner before tightening down.

Slide rails can be ordered with article numbers shown in the table.

Motor															Vijci	horizontalan	Težina
veličina	Član br.	l1	l2	l3	a	h	b1	b2	c	d	e1	e2	e3	e4	do stopala	vijci	kg/2 pc
280	3GZF334730-55	800	600	900	16	75	100	120	35	28	100	100	200	165	M20x90	M24x300	50
315	3GZF334730-56	1000	720	1100	16	80	120	140	40	28	140	140	240	190	M24x100	M24x300	80
355 - 400	3GZF334730-57	1250	485	1350	16	80	120	140	35	28	140	140	240	190	M24x100	M24x300	90

 Motors in brief

Cast iron motors, sizes 71 - 132

Veličina motora		71	80	90	100	112	132
Stator and end shields	materijal	Liveno gvožde
	Paint color shade	Munsell blue 8B 4.5/3.25
	Klasa korozije	C3 (medium)
Feet		Integrated cast iron feet
ležajevi	D-kraj	6203-2Z / C3	6204-2Z / C3	6205-2Z / C3	6206-2Z / C3	6206-2Z/C	6208-2Z / C3
	N-kraj	6202-2Z / C3	6203-2Z / C3	6204-2Z / C3	6205-2Z / C3	6205-2Z/C3 *)	6208-2Z / C3
Axially locked bearings		Locked at D-end
Brtve ležajeva	D-kraj	V-prsten
	N-kraj	Labyrinth seal in IE2, V-ring in IE3
podmazivanje		Permanently lubricated shielded bearings
Measuring nipples for		Nije uključeno
condition monitoring of
the bearings
Registarska pločica	materijal	Nehrđajući čelik
Priključna kutija	Okvir i poklopac	Liveno gvožde
	Klasa korozije	C3 (medium)
	Vijci za poklopac	Zinc-electroplated steel
Connections	Threaded openings	2xM16	2xM25	2xM25
	Terminali	6 terminals for connection with cable lugs (not included)
	Kabelske uvodnice	Cable flange included, glands as option
ventilator	materijal	Glass-fiber reinforced polypropylene
Poklopac ventilatora	materijal	čelik
	Paint color shade	Munsell blue 8B 4.5/3.25
	Klasa korozije	C3 (medium)
Stator winding	materijal	bakar
	izolacija	Insulation class F. Temperature rise class B unless otherwise stated.
	Winding protection	3 PTC thermistors, 150 °C
Rotor winding	materijal	Pressure die-cast aluminum
Balancing method		Half-key balancing as standard
Keyway		Closed keyway
Otvori za odvod		Drain holes with closable plastic plugs, open on delivery
Prilog		IP 55
način hlađenja		IC 411

 *) 6206-2Z/C3 in IE3

Motors in brief

Cast iron motors, sizes 160 - 250

Veličina motora		160	180	200	225	250
Stator and end shields	materijal	Liveno gvožde
	Paint color shade	Munsell blue 8B 4.5/3.25
	Klasa korozije	C3 (medium)
Feet	materijal	Integrated cast iron feet, bolted feet when terminal box on LHS/RHS
ležajevi	D-kraj	6309 / C3	6310 / C3	6312 / C3	6313 / C3	6315 / C3
	N-kraj	6209 / C3	6209 / C3	6210 / C3	6212 / C3	6213 / C3
Axially locked bearings		Locked at D-end
Brtve ležajeva	D-kraj	Gamma-ring
	N-kraj	Gamma-ring
podmazivanje		Regreasable bearings, regreasing nipples M6x1
Measuring nipples for		Uključeno
condition monitoring of
the bearings
Registarska pločica	materijal	Nehrđajući čelik
Priključna kutija	Okvir i poklopac	Liveno gvožde
	Klasa korozije	C3 (medium)
	Vijci za poklopac	Zinc-electroplated steel
Connections	Kablovski ulazi	2xM40, 2xM20		2xM63, 2xM20
	Terminali	6 terminals for connection with cable lugs (not included)
	Kabelske uvodnice	Cable flange included, glands as option
ventilator	materijal	Glass-fiber reinforced polypropylene
Poklopac ventilatora	materijal	čelik
	Paint color shade	Munsell blue 8B 4.5/3.25
	Klasa korozije	C3 (medium)
Stator winding	materijal	bakar
	izolacija	Insulation class F. Temperature rise class B unless otherwise stated.
	Winding protection	3 PTC thermistors, 150 °C
Rotor winding	materijal	Pressure die-cast aluminum
Balancing method		Half-key balancing as standard
Keyway		Closed keyway
Otvori za odvod		Drain holes with closable plastic plugs, open on delivery
Prilog		IP 55
način hlađenja		IC 411

 Motors in brief

Cast iron motors, sizes 280 - 450

 

Veličina motora			280	315	355	400	450
Stator and end shields	materijal	Liveno gvožde
	Paint color shade	Munsell blue 8B 4.5/3.25
	Klasa korozije	C3 (medium)
Feet	materijal	Integrated cast iron feet
ležajevi	D-kraj	2-polni	6316 / C3	6316 / C3	6316M / C3	6317M / C3	6317M / C3
		4-12-pole	6316 / C3	6319 / C3	6322 / C3	6324 / C3	6326M / C3
	N-kraj	2-polni	6316 / C3	6316 / C3	6316M / C3	6317M / C3	6317M / C3
		4-12-pole	6316 / C3	6316 / C3	6316 / C3	6319 / C3	6322 / C3
Axially locked bearings		Locked at D-end
Brtve ležajeva	D-kraj	V-ring or labyrinth seal
	N-kraj	V-ring or labyrinth seal
podmazivanje		Regreasable bearings, regreasing nipples M10x1
Measuring nipples for		Uključeno
condition monitoring of
the bearings
Registarska pločica	materijal	Nehrđajući čelik
Priključna kutija	Okvir i poklopac	Liveno gvožde					Čelični poklopac
	Klasa korozije	C3 (medium)					čelik
	Vijci za poklopac	Zinc-electroplated steel
Connections	kabl	2-4-pole	2xM63+2xM20	2xM63, 2xØ48-	2xØ48-60, 60-80,	2xØ60-80 (2-6-pole)	2xM2+0
	unose			60+2xM20	2xM20		2xØ60-80, 2xM20
		6-8-pole			2xØ32-49, 48-60,	2xØ48-60 (8-pole),
					2M20	2xM20
				See section Standard terminal box for detailed information.
	Terminali		6 terminals for connection with cable lugs (not included)
	Kabelske uvodnice		Cable flange, glands as option
ventilator	materijal	Glass-fiber reinforced polypropylene
Poklopac ventilatora	materijal	čelik
	Paint color shade	Munsell blue 8B 4.5/3.25
	Klasa korozije	C3 (medium)
Stator winding	materijal	bakar
	izolacija	Insulation class F. Temperature rise class B unless otherwise stated
	Winding protection	3 PTC thermistors, 155 °C
Rotor winding	materijal		Pressure die-cast aluminum
Balancing method			Half-key balancing
Keyway			Open keyway
Otvori za odvod			Drain holes with closable plastic plugs, open on delivery
Prilog			IP 55
način hlađenja			IC 411

 Konstrukcija motora

Exploded view, frame size 315

1 Stator frame

2 End shield, D-end

3 Screws for end shield, D-end

V-ring in 4-8 pole motors

4 End shield, N-end

5 Screws for end shield, N-end

6 Rotor with shaft

7 Key, D-end

8 Priključna kutija

9 Priključna ploča

10 Intermediate flange

11 Screws for terminal box cover

12 Outer bearing cover, D-end

13 Valve disc with labyrinth seal, D-end; standard in 2-pole motors,

14 Bearing, D-end

15 Inner bearing cover, D-end

16 Screws for bearing cover

17 Outer bearing cover, N-end

18 Seal, N-end

19 Wave spring

20 Valve disc, N-end

21 Bearing, N-end

22 Inner bearing cover, N-end

23 Screws for bearing cover

24 Ventilator

25 Poklopac ventilatora

26 Screws for fan cover

27 Natpisna pločica

28 Lubrication plate

29 Grease nipple, D-end

30 Grease nipple, N-end

31 SPM nipple, D-end

32 SPM nipple, N-end

Ukupna ponuda proizvoda

Motors, generators and mechanical power transmission products with a complete portfolio of services

IEC motori

– Low voltage motors

– High voltage induction and synchronous motors

– Marine motors

– Motors for explosive atmospheres

– Motors for food and beverage

– Motors for variable speed drives

– Permanent magnet motors

– Synchronous reluctance motors

– Traction motors

NEMA motori

– Low voltage motors

– High voltage induction and synchronous motors

– Marine motors

– Motors for explosive atmospheres

– Motors for variable speed drives

– Permanent magnet motors

– Servomotors

– Washdown motors

generatori

– Generators for wind turbines

– Generators for diesel and gas engine power plants

– Generators for steam and gas turbine power plants

– Generators for marine applications

– Generators for industrial applications

– Generators for traction applications

– Synchronous condensers for reactive power compensation

Mechanical power transmission components,

bearings, gearings

– Mounted bearings

– Enclosed gearing

– Mechanical drive components

– Couplings

– Sheaves and bushings

– Conveyor components

– Geared motor units

Life cycle services

ABB -ov portfelj pogona

Optimal solution for you

Being able to rely on the continuous high performance and efficiency of your operations is something you want to take for granted. ABB variable frequency drives are made with all this in mind, established upon more than 40 years of experience and backed by a broad range of life cycle services.

ABB drives help you to optimize your processes and systems with state-of-the-art motor control technology, resulting in increased energy efficiency, better product quality, and reduced operating costs with higher output, less downtime, and reduced need for maintenance. All ABB drives are designed for easy selection, ordering, installation and use, and they offer integrated safety features, giving you more time to focus on what matters for you and your business.

Our portfolio offers low-voltage AC and DC drives, medium-voltage AC drives, and motion control drives spanning the fractional-kilowatt to multimegawatt power level. There is a drive available for essentially every industry and application and for all types of motors, in environments ranging from water utility facilities to clean electrical rooms, and to harsh coal mines and windy offshore platforms to food and beverage production. This wide product range allows you to select the best-fitting drive solution, providing maximum reliability and efficiency for every need.

Kontaktiraj nas

www.sogears.com

Mobilni telefon: + 86-18563806647

Whatsapp / Wechat: +8618563806647

E-mail: Ova e-mail adresa je zaštićena od spam robota. Omogućiti JavaScript da biste je vidjeli.; ID Skype-a: qingdao411